Arm-electronics C9TMX Manuel d'utilisateur

1 9 Channel Color Triplex Multiplexer User’s Manual and Operation Instructions Version 1.0

10Mode Function Description Overview : In the 9-ch multiplex , the display mode is divided into two main disp

11 Quad screen display: Either in live display or in VCR playback mode, press the Quad screen key, the images of the four cameras will be displayed

12 8 split window index 8 split camera index 9-CH screen display In live display mode, press the9-ch screen key, the images o

13 16 split window index & camera index Auto sequential switching: Press AUTO key the systems will enter the auto sequential switching mode (Gr

14Pin Assignment ALARM PORT (DB-25 Female) 1~9 : Alarm Input CH1~CH9 17 : VCR Trigger

15Functional Setting 1. Menu SetupPress the Menu key to set time/date, camera setup, alarm setup, reco

164. Camera Setup This setup page can enter only in the live mode. If you select this page in playback mode, the message ”ERR” will be pr

175. Alarm Setup ALARM FUNCTION: Enable/disable the alarm function “ON”: enable the alarm function “OFF”: disable the alarm function

18SELECT CHANNEL: Select the adjusting channel no (CH01-CH9). If select a channel, and then the content of ALARM POLARITY and POP-OUT MONITOR will

196. Record Setup VCR RECORD TIME SETTING: Use the UP/ DOWN/ ENTER keys to select VCR RECORD TIME and change the recording hour to be

2 Table of Content Safety Warning 1 Introduction

20NORMAL RECORD: Enable/disable the recording function for each channel. “NO”: This channel will be recorded out to the VCR OUT port. “OFF”: T

217. Event Setup ALARM EVENT LOG: Enable/disable the ALARM EVENT LOG to the history listing. “ON”: enable the ALARM EVENT LOG to th

228. Motion Setup The method of motion detection is as below description. Motion detection function operates on each channel independently. Each c

23MOTION INDICATOR: Enable/disable the “human icon” indicator as a channel has motion detection. “ON”: Enable the “human icon” indicator as

24 selected motion detect area. “OFF”: invisible the motion detect area for each channel, but the motion detect function is still enable.

259. Remote Setup REMOTE BAUD RATE: 2400 / 4800 / 9600 / 19200 MACHINE ADDRESS ID: Use the UP/DOWN/ENTER keys to set the Address ID of

2610. System Setup SEQUENCE DWELL TIME SETTING: Use the UP/ DOWN / ENTER keys to select SEQUENCE DWELL TIME and change the dwell

27TITEL DISPLAY: Enable/display the camera title display function “ON”: enable the title of camera displayed on the screen. “OFF”: d

3 4. Alarm Indicator 13 Alarm channel 13 1. Select Channel 14

4 5. Cursor in blue color 20 Remote Setup 21 1. Remote BAUD Rate 21 2. Machine

5 Safety Warning 1. To prevent fire or shock hazard, do not expose this equipment to the e

6 Introduction 9 Channel Color Triplex Multiplexer, a real time color Triplex Multiplexer, is the

7 Specification System format: NTSC / PAL programmable Video input: 9 cameras inputs

8 The System Connection of 9 Channel Color Triplex Multiplexer REMOTE CONTROLRS485 Front Panel Definition

9 Rear Panel Definition 1~9 : Camera Input Port 10~18 : Camera Looping 19 : Alarm Port (