Arm-electronics CMS Manuel d'utilisateur télécharger pdf (Page 48)

User’s Manual

6.6 Sequence

This function is used to set the displaying

sequence. Before starting sequence display,

users need to add channels to the sequence

list. Right click on any channel and select

<Add to Sequence> to add, or <Remove from

Sequence> to remove. Note that when the

channel is added to the sequence, a capital

“S” will be shown on the icon.

After the channels are added to the sequence, click on the <Setting> icon and

choose <Sequence> to setup the sequence. Under the <Sequence Setup>

option, users can setup the dwell time (1 to 120 seconds), and split mode (1*1,

2*2, 3*3, 4*4, or 5*5). <Sequence Order> lists the channels that have been

added to the list in order. Click <Save> to save the settings.

Click <Clear Sequence List> to empty the list. A message window will be

shown for confirmation.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 121 122

Pas de commentaire

Arm-electronics CMS Manuel d'utilisateur Page 48